RE: [RC] [RC] Retrofitting Epics (or "Fun with EZ Boots") - Nancy MittsLucy,The front "T nuts" (where the cable attaches) are the same length for the easy boot or Epic. The longer ones that came with your gaiter are for the rear screws, 2 on each side. You don't need or want longer screws, you just need to take a regular screwdriver and poke out the original shorter nuts from the boot and put the longer ones in. If you don't completely tighten the screws at first, it provides a little more "give" until you get them all seated, then go back and tighten them all down. I have 2, size 2 "1st version" gaiters removed from NEW boots for $6.00 each. Also a few 1st version Epics still intact. 1 size 1, 4 size 0, 4 size 00, $40 each. Easy Care 90 day warranty will apply. I am unable to update my website at this time, (a whole 'nother problem) so not everything is listed there. Nancy Mitts, Stablegear Tack From: Lucy Chaplin Trumbull <elsietee@xxxxxxxxxxxx> Subject: [RC] Retrofitting Epics (or "Fun with EZ Boots") Well, after trying to add a gaiter to a new EZ boot last night, I already see why my farrier advised me to buy some longer screws ahead of time. <g> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Ridecamp is a service of Endurance Net, http://www.endurance.net. Information, Policy, Disclaimer: http://www.endurance.net/Ridecamp Subscribe/Unsubscribe http://www.endurance.net/ridecamp/logon.asp Ride Long and Ride Safe!! =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|