[RC] Sport saddle question - Karen
Any suggestions, input etc?....
Hi Cindi: If you haven't already, change to center-fire rigging. A 42"
strap on each side will work -- attach it to the back D-ring, then loop
thru the girth and up thru the front D, then buckle. This will move the
girth farther back on the horse (the shorter girth you use, the farther
back it will be) and hold the saddle more securely. If you use a b/c, be
sure that it is snug enough so that if your horse drinks or wants to graze
you have to unclip it from at least one side of the saddle. If it is
looser than that, it probably isn't doing much.
It also helps to attach your pad to the saddle itself. I do this by poking
a hole in the front of the pad in the front -- 1 on each side, then tying
hay string thru it and using a small clip. I then clip the pad to the
D-rings on the front of the saddle. This will keep the pad from
moving. I have some pics of that
here: http://members.tripod.com/ridephotos/crewbag/bag2.html
I like using a toklat woolback pad. It is wool on both sides, and I find
that it breathes better and does not slip. I have used other pads in the
past. They don't hold up as long. They do cost less, but you get what you
pay for. If the pad you have now is not 100% wool, that could be causing a
problem.
Also, what might help with the heat bumps. Next time don't just pull your
saddle off when you finish riding. Loosen the girth, lift the saddle
slightly, and then let it stay on the horses back for a few more
minutes. You may want to do this a couple of times.
Happy Trails,
Karen
in NV
http://members.tripod.com/ridephotos/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Ridecamp is a service of Endurance Net, http://www.endurance.net.
Information, Policy, Disclaimer: http://www.endurance.net/Ridecamp
Subscribe/Unsubscribe http://www.endurance.net/ridecamp/logon.asp
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|